MY0024-Wireless Smart Remote Control Power Outlet
SPECIFICATIONS
Type: Electrical Plug
Transmission frequency: 433.92MHz
Standard: Socket size: 9.7*4.8cm
Shape: Rectangular
Remote control size: 8*3.5*1.4cm
Rated Current: Max. Load current: 10A
Power for transmitter: DC 12V 23 A battery(battery is not included)
Plug Type: EU/FR/US/AU/UK plug
Is Smart Device: No
Installation Type: Wall Mounted
Grounding: Other
Features: Wireless
Features: Remote Control
Certification: RoHS
Application: Residential / General-Purpose
Leaving an appliance in standby can consume 10-30% of the power and can shorten the life of the appliance by 15%.
This device is a great solution for controlling appliances in inaccessible areas, or for people with limited mobility.
It is great if you need to get out of bed in the middle of the night.
You can use the remote to turn other rooms' lights on and off.
Additional remotes are available so you can leave remotes in different rooms and not worry about forgetting the remote.
Simple and easy to use, no installation required - just plug in and use.
Remotely switch on/off any appliance at the push of a button
Specifications:
Working voltage for socket: 230V 50Hz
Transmission frequency: 433.92MHz
Max. Load current: 10A 2300W
Power for transmitter: DC 12V 23 A battery(battery is not included)
Socket size: 9.7*4.8cm
Remote control size: 8*3.5*1.4cm
Packing includes:
1 x Remote controlled switch socket
1 x Remote control(battery is not included)
Note：
1、Please check the plug of the sockets before purchasing, and select the corresponding plug when placing an order. We will ship according to the plug you choose in your order. If you have any doubts about the choice of socket plug, please contact us, we will deal with you in time, thank you!
2、French buyer friends, please buy French standard "FR", please do not buy "EU". If French friends buy "EU", you need to buy adapters before you can use it.
3、Learn function button
Press once: switch the radio-controlled socket on or off manually.
Press and hold the learning button: reset the radio-controlled socket and reprogram it with the remote control.
Pairing signal
1.Press the pairing signal key for 5 seconds,
2.see the indicator light flashes.
3.Press the button on the remote control 4.immediately,the signal is successfully paired.
Clear signal
1. Disconnect power socket.
2. Hold down the learn button.
3. While keeping the learn button pressed, plug the power outlet into the power source.
4. Wait until the LED flashes quickly and then goes out again.
5. Release the learn button. The socket is now reset.
6. Press the learn button again to reprogram the socket.
